E STEEL SDN. BHD.
No 1 & 3, Lorong Sungai Puloh 7/KU6, Kawasan Perindustrian Sungai Puloh, 42100 Klang, Selangor, Malaysia.

+603-3292 8686

Hardox 400 | Abrasion Wear Resistant Plate

8 / 18

Description

Hardox 400 Supplier (Origin Sweden)

HARDOX 400 is an abrasion resistant plate with a hardness of 400 HBW, intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties. HARDOX 400 offers very good weldability.

Hardness : 370-430 HBW

Mechanical Properties of Hardox 400

Yield strength : 1000MPa

Tensile strength : 1250MPa

Elongation : 10%

Impact Properties

Testing temperature :- 40 °C

Impact energy Charpy-V, longitudinal : 45(J)

Heat Treatment and Fabrication

HARDOX 400 has obtained its mechanical properties by quenching and when necessary by means of subsequent tempering. The properties of the delivery condition can not be retained after exposure to service or preheating temperatures in excess of 250oC (480o F).

HARDOX 400 is not intended for further heat treatment.For information concerning welding and fabrication, see our brochures on www.hardox.com or consult our Technical Customer Service.

Appropriate health and saftey precautions must be taken when welding, cutting, grinding or otherwise working on the product. Grinding, especially of primer coated plates, may produce dust with high particle concentration.

Chemical Properties

Grade	C max	Mn max	P max	S max	SI max	Cr max	NI max	Mo max	B max	V	Other Element

Hardox 400	0.20	1.60	0.025	–	0.70	0.80	1.00	0.80	0.005	–
Sumihard k400	0.17	1.25	0.012	0.003	0.29	0.02	0.02	0.10	0.001	–
Welhard 400	0.22	2.00	0.250	0.01	0.55	1.20	–	0.60	0.005	–	Nb-.05
Fora 400	0.20	1.60	0.020	0.003	0.01	1.00	0.50	0.20	0.003	–
Raex 400	0.20	1.70	0.030	0.015	0.70	1.50	0.40	0.50	0.004	–	Ai=.060 max
Xar 400	0.28	1.50	0.025	0.01	0.80	1.00	0.50	0.50	0.005
Brinar 400	0.18	1.50	0.015	0.005	0.30	1.55	1.20	0.60	0.005	–	Ai=.015 max
Dillidur 400	0.20	1.80	0.025	0.01	0.50	1.50	0.80	0.50	0.005	0.08	Nb=.05 max
JFE EH360LE	0.17	1.60	0.020	0.01	0.55	0.40	–	0.35	0.004	0.02
Quard 400	0.16	1.60	0.025	0.01	0.70	0.50	0.25	0.25	0.005	–

Applications

Hardox 400 Wear and Abrasion Plate can be used in the following ways :
- Crushers, sieves, feeders, measuring pockets, skips, cutting edges, conveyors, buckets, knives, gears, sprockets, dumptrucks, loaders, industrial trucks, lorries, bulldozers, excavators, slurry pipe systems, screw conveyors, presses etc.

Our Sales & Supplier Network

E Steel has a Wide Global Sourcing and Sales Networking including :
Australia, Pakistan, Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Messages*