Alloy 800 Seamless Pipe Supplier
23 Dec 2020
.jpeg)
.jpeg)
.jpeg)
Above Material is Incoloy 800h/HT , Alloy 800H/HT Seamless Pipe with OD60.3mm x T3.91mm (Origin : Italy)
Heat Treatment & Fabrication for Incoloy 800H/HT
Machinability - Machining characteristics of this INCOLOY alloy 800 are similar to that of iron-based alloys. This alloy tends to work-harden during machining.
Welding - INCOLOY alloy 800 can be welded by common welding techniques, using a matching filler metal.
Forming - This alloy exhibits good ductility and hence can be formed using conventional methods
Hot Working - INCOLOY alloy 800 can be hot worked at temperature ranges of 871-1232°C (1600-2250°F).
Cold Working - Cold working may be done on the alloy using standard tooling.
Annealing - INCOLOY alloy 800 may be annealed after cold working. Annealing should be done at 982°C (1800°F) for 15 min and then the alloy should be air cooled.
* You may contact us through ; https://www.ecarbonsteel.com/index.php?ws=showproducts&products_id=3286305
Incoloy 800 / Alloy 800HT (32 Ni/21 Cr) Seamless Pipe & Tube Supplier Malaysia, Singapore and Indonesia
Above Material is Incoloy 800h/HT , Alloy 800H/HT Seamless Pipe with OD60.3mm x T3.91mm (Origin : Italy)
Mechanical Properties for Nickel Alloy 800
| Properties | Metric | Imperial |
| Tensile strength(annealed) | 600 MPa | 87 ksi |
| Yield strength(annealed) | 275 MPa | 39.9 ksi |
| Elongation at Break | 45% | 45% |
Heat Treatment & Fabrication for Incoloy 800H/HT
Machinability - Machining characteristics of this INCOLOY alloy 800 are similar to that of iron-based alloys. This alloy tends to work-harden during machining.Welding - INCOLOY alloy 800 can be welded by common welding techniques, using a matching filler metal.
Forming - This alloy exhibits good ductility and hence can be formed using conventional methods
Hot Working - INCOLOY alloy 800 can be hot worked at temperature ranges of 871-1232°C (1600-2250°F).
Cold Working - Cold working may be done on the alloy using standard tooling.
Annealing - INCOLOY alloy 800 may be annealed after cold working. Annealing should be done at 982°C (1800°F) for 15 min and then the alloy should be air cooled.
* You may contact us through ; https://www.ecarbonsteel.com/index.php?ws=showproducts&products_id=3286305