- B2B Metal and Engineering Marketplace
- Alloy Steel
- Aluminium
- Carbon Steel
- Copper Alloy
- Hardox Plate
- Metal Cutting Services
- Nickel Alloy
- Plastic Mould Steel
- Precision Ground Plate
- Stainless Steel
- Stainless Steel Shim Plate , Carbon Steel Shim Plate
- Structure Steel
- Titanium
- Tool Steel
- Others
E STEEL SDN. BHD.
No 1 & 3, Lorong Sungai Puloh 7/KU6, Kawasan Perindustrian Sungai Puloh, 42100 Klang, Selangor, Malaysia.
+603-3292 8686
Hardox 450 | Abrasion Wear Resistant Plate
| Previous | 10 / 18 | Next |
Description
HARDOX 450 is an abrasion resistant plate with a hardness of 450 HBW, intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties. HARDOX 450 offers very good weldability
* Values are to be used as a guide only. Actual values of specific plates can be obtained
- Dumper bodies, containers, crushers, sieves, feeders, measuring pockets, skips, cutting edges, conveyors, buckets, knives, gears, sprockets, etc.
Our Sales & Supplier Network
E Steel has a Wide Global Sourcing and Sales Networking including :
Australia, Pakistan, Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.
Hardox 450 Supplier (Origin Sweden)
HARDOX 450 is an abrasion resistant plate with a hardness of 450 HBW, intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties. HARDOX 450 offers very good weldability
Hardness : 425-475 HBW
Mechanical Properties
Yield strength : 175 KSI
Tensile strength : 205 KSI
Elongation : 14%
Impact Properties
Testing temperature :- 40 °C
Impact energy Charpy-V, longitudinal : Ft-lbs 30 , 40(J)
Heat Treatment and Fabrication
HARDOX 450 has obtained its mechanical properties by quenching and when necessary by means of subsequent tempering. The properties of the delivery conditon can not be retained after exposed to service or preheating temperatures above 480°F (250°C).HARDOX 450 is not intended for further heat treatment. For information concerning welding and fabrication, see our brochures on www.hardox.com
or consult our Technical Customer Service.
Appropriate health and saftey precautions must be taken when welding, cutting,grinding orotherwise working on the product. Grinding, especially of primer coated plates, may produce dust with high particle concentration.
| Mechanical Properties | Typical values for 20 mm plate thickness | |||
| Yield Strength (Mpa) | 1200 | |||
| Tensile Strength (Mpa) | 1400 | |||
| Elongation (%) | 10 | |||
| Hardness | Typical | 425 – 475 HBW | ||
| Available Thickness | 3.0mm – 120mm | |||
* Values are to be used as a guide only. Actual values of specific plates can be obtained
Applications
Hardox 450 Wear and Abrasion Plate can be used in the following ways :- Dumper bodies, containers, crushers, sieves, feeders, measuring pockets, skips, cutting edges, conveyors, buckets, knives, gears, sprockets, etc.
Our Sales & Supplier Network
E Steel has a Wide Global Sourcing and Sales Networking including :
Australia, Pakistan, Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.