- B2B Metal and Engineering Marketplace
- Alloy Steel
- Aluminium
- Carbon Steel
- Copper Alloy
- Hardox Plate
- Metal Cutting Services
- Nickel Alloy
- Plastic Mould Steel
- Precision Ground Plate
- Stainless Steel
- Stainless Steel Shim Plate , Carbon Steel Shim Plate
- Structure Steel
- Titanium
- Tool Steel
- Others
E STEEL SDN. BHD.
No 1 & 3, Lorong Sungai Puloh 7/KU6, Kawasan Perindustrian Sungai Puloh, 42100 Klang, Selangor, Malaysia.
SUS317L Stainless Steel | SUS317L | SS317L | AISI 317
| Previous | 12 / 44 | Next |
- stainless steel 317L supplier singapore
- SUS317L SS317L Supplier Singapore
- SUS317L SS317L Supplier Indonesia
- stainless steel 317L supplier indonesia
- aisi 317L supplier Singapore Indonesia Brunei
317L Stainless Steel (SS317L) is the most readily machineable of all the austensitic grades of stainless steel.
We supply and export to Singapore , Indonesia , Brunei and other ASEAN Countries.
Our specialty is to provide wide range of stainless steel with no minimum order (MOQ).
E Steel supply Stainless Steel SUS317L (SS317L) Round Bars , Stainless Steel SUS317L (SS317L) Plates and Sheets.
Stainless Steel SUS317L Suppliers - SUS317L , SS317 , UNS S31703 , DIN 1.4438
Stainless Steel 317L ( S31703 / AISI 317L ) is the low-carbon derivative of Stainless Steel SS317 ( S31700 ). The metal maintains its high strength and strong corrosion resistance; however, the carbon content does have several effects. SUS317L has greater srength under welding; its products are stronger.
Like SUS 317, stainless steel 317L does not respond or harden from heat treatments. When hot working, the metal should be heated ideally within the range of 2100-2300°F.
Dropping below 1700°F will cause the metal to be unresponsive. For these reasons, SS317L is effective in high temperature areas that experience high rates of chemical corrosion, creep, and stress-to-rupture.
Materal SS317L is commonly utilized in chemical environments. It has shown itself to be effective in conditions where acids are present, such as acidic chloride. The metal is resistant to corrosion from such substances. As such, it is common to find 317L stainless steel in equipment used in pulp and paper mills. The acidic environment requires a strength, corrosion resistant metal.
It is possible for Stainless Steel Grades SS317 and SS317L to become dually certified.
Chemical Analysis of Stainless Steel SS317L , SUS317L (%Weight)
| C | Cr | Ni | Mo | N | Mn |
| < 0,030 | 18 | 12,5 | 3,1 | 0.1 | 2.0 |
Mechanical Properties of SS317L
| 0,2 Y.S. – Rp 0,2min ASTM / EN | 0,2 Y.S. – Rp 0,2(2)typical value | UTS – Rm min ASTM / EN | UTS – Rm(2)typical value | EI-A(1)% | PREN(4) | Hardness | ||||
| MPa | Ksi | MPa | Ksi | MPa | Ksi | MPa | Ksi | |||
| 220 | 32 | 318 | 46 | 520 | 75 | 599 | 87 | 40 | 29 | 217HB |
Resistance to Corrosion: Stainless Steel Types SUS 316, SUS 316L, SUS 317 and SUS 317L are more resistant to atmospheric and other mild types of corrosion than Stainless Steel Types SUS302, SUS304 and SUS304L. In general, media that do not corrode Types SUS 302, SS304, and SS304L Stainless Steel, will not attack these molybdenum-containing grades. One known exception is highly oxidizing acids such as nitric acid to which the molybdenum-bearing stainless steels are less resistant.
Features of Stainless Steel 317L
- Excellent corrosion resistance
- Higher creep, stress-to-rupture and tensile strength at elevated temperature
- Able to maintain clean surfaces
Comparison of Chemical Composition (%) between Stainless Steel SUS316 & Stainless Steel SUS317
| Element |
Percent by Weight
Maximum Unless Range is Specified |
|||
| SUS316 | SUS316L | SUS317 | SUS317L | |
| Carbon | 0.08 | 0.03 | 0.08 | 0.03 |
| Manganese | 2.00 | 2.00 | 2.00 | 2.00 |
| Silicon | 0.75 | 0.75 | 0.75 | 0.75 |
| Chromium | 16.00 | 16.00 | 18.00 | 18.00 |
| 18.00 | 18.00 | 20.00 | 20.00 | |
| Nickel | 10.00 | 10.00 | 11.00 | 11.00 |
| 14.00 | 14.00 | 15.00 | 15.00 | |
| Molybdenum | 2.00 | 2.00 | 3.00 | 3.00 |
| 3.00 | 3.00 | 4.00 | 4.00 | |
| Phosphorus | 0.045 | 0.045 | 0.045 | 0.045 |
| Sulfur | 0.030 | 0.030 | 0.030 | 0.030 |
| Nitrogen | 0.10 | 0.10 | 0.10 | 0.10 |
| Iron | Bal. | Bal. | Bal. | Bal. |
Comparison Mechanical Properties between SUS316 and SUS317
| Property | SUS 316 (S31600) | SUS 316L (S31603) | SUS 317 (S31700) | SUS 317L (S31703) |
|
Yield Strength 0.2% Offset psi
mpa |
30,000
205 |
25,000
170 |
30,000
205 |
30,000
205 |
|
Ultimate Tensile Strength
psi mpa |
75,000
515 |
70,000
485 |
75,000
515 |
75,000
515 |
| Percent Elongation in 2 in. or 51mm | 40 | 40 | 35 | 40 |
|
Hardness, Max. Brinell
RB |
217
95 |
217
95 |
217
95 |
217
95 |
Our Sales & Supplier Network
Australia, Pakistan, Malaysia, Taiwan, China, Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, Sweden, United States, Dubai, Finland, Brunei, Germany & etc.
E Steel is the Global Metal Procurement Company in providing and sourcing raw materials to a variety of engineering industries and sectors. We work as an online B2B Metal Marketplace to help our customers in finding the required steels that are difficult to source locally.