- B2B Metal and Engineering Marketplace
- Alloy Steel
- Aluminium
- Carbon Steel
- Copper Alloy
- Hardox Plate
- Metal Cutting Services
- Nickel Alloy
- Plastic Mould Steel
- Precision Ground Plate
- Stainless Steel
- Stainless Steel Shim Plate , Carbon Steel Shim Plate
- Structure Steel
- Titanium
- Tool Steel
- Others
E STEEL SDN. BHD.
No 1 & 3, Lorong Sungai Puloh 7/KU6, Kawasan Perindustrian Sungai Puloh, 42100 Klang, Selangor, Malaysia.
+603-3292 8686
Nitronic 50 | XM-19 Stainless Steel (UNS S20910)
| Previous | 38 / 44 | Next |
- Nitronic 50 | XM19 Stainless Steel Suppliers Indonesia
- Nitronic 50 | XM19 Stainless Steel Suppliers Singapore
We are the Leading Supplier of Stainless Steel Nitronic 50.
Nitronic 50 is a High-Performance Austenitic Stainless Steel has corrosion resistance greater than that provided by Stainless Steel Grade SUS 316 and SUS 316L.
We supply and export to Singapore , Indonesia , Brunei and other ASEAN Countries.
Our specialty is to provide wide range of stainless steel with no minimum order (MOQ).
E Steel supply Stainless Steel Nitronic 50 Round Bars / Rods / Shafts , Nitronic 50 Plates.
Nitronic 50 can be supplied in Annealed Condition and High Strength Condition.
Description
Outstanding corrosion resistance gives NITRONIC 50 Stainless Steel the leading edge for applications where Stainless Steel Grade SS316 , SS316L, SS317 and SS317L are only marginal. It’s an effective alloy for the petroleum, petrochemical, chemical, fertilizer, nuclear fuel recycling, pulp and paper, textile, food processing and marine industries.
NITRONIC50 / XM-19 Stainless Steel provides outstanding corrosion resistance – superior to Types sus316, sus316L, sus317 and sus317L in many media. For many applications the 1950 F (1066 C) annealed condition provides adequate corrosion resistance and a higher strength level. In very corrosive media or where material is to be used in the as-welded condition, the 2050 F (1121 C) annealed condition should be specified. High-Strength (HS) NITRONIC50(XM-19) bars are useful for applications such as shafting and bolting, but do not quite exhibit the corrosion resistance of the annealed conditions in all environments.
The resistance to intergranular attack is excellent even when sensitized at 1250 F (675 C) for one hour to simulate the heat-affected zone of heavy weldments. Material annealed at 1950 F (1066 C) has very good resistance to intergranular attack for most applications. However, when thick sections are used in the as-welded condition in certain strongly corrosive media, the 2050 F (1121 C) condition gives optimum corrosion resistance.
Our Sales & Supplier Network
Australia, Pakistan, Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.
Nitronic 50 is a High-Performance Austenitic Stainless Steel has corrosion resistance greater than that provided by Stainless Steel Grade SUS 316 and SUS 316L.
We supply and export to Singapore , Indonesia , Brunei and other ASEAN Countries.
Our specialty is to provide wide range of stainless steel with no minimum order (MOQ).
E Steel supply Stainless Steel Nitronic 50 Round Bars / Rods / Shafts , Nitronic 50 Plates.
Nitronic 50 can be supplied in Annealed Condition and High Strength Condition.
Description
Stainless Steel Nitronic 50 Suppliers - UNS S20910 , XM-19
NITRONIC 50 Stainless Steel provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range. This High-Performance Austenitic Stainless Steel has corrosion resistance greater than that provided by Stainless Steel Grade SUS 316 and SUS 316L, plus approximately twice the yield strength at room temperature. In addition, Stainless Steel NITRONIC 50 has very good mechanical properties at both elevated and sub-zero temperatures. And, unlike many austenitic stainless steels, NITRONIC 50 ( XM19 ) does not become magnetic when cold worked.
Chemical Composition of Nitronic 50
| Element | Content (%) |
| Chromium, Cr | 20.5-23.5 |
| Nickel, Ni | 11.5-13.5 |
| Manganese, Mn | 4-6 |
| Molybdenum, Mo | 1.5-3 |
| Silicon, Si | 1 max |
| Nitrogen, N | 0.20-0.40 |
| Niobium, Nb | 0.10-0.30 |
| Vanadium, Va | 0.10-0.30 |
| Phosphorous, P | 0.04 max |
| Carbon, C | 0.06 max |
| Sulfur, S | 0.010 max |
Mechanical Properties of Nitronic 50 , XM19 Stainless Steel
| Properties | Metric | Imperial |
| Tensile strength | 690 MPa | 100 ksi |
| Yield strength | 380 MPa | 55 ksi |
| Elongation | 35% | 35% |
| Hardness | 293 | 293 |
Applications of Nitronic 50 Stainless Steel
- Superior corrosion resistance
- Almost double the yield strength
- Exceptionally low magnetic permeability
- Outstanding cryogenic properties
Outstanding corrosion resistance gives NITRONIC 50 Stainless Steel the leading edge for applications where Stainless Steel Grade SS316 , SS316L, SS317 and SS317L are only marginal. It’s an effective alloy for the petroleum, petrochemical, chemical, fertilizer, nuclear fuel recycling, pulp and paper, textile, food processing and marine industries.
-
Components using the combination of excellent corrosion resistance and high strength currently include pumps, valves and fittings, fasteners, cables, chains, screens and wire cloth, marine hardware, boat and pump shafting, heat exchanger parts, springs and photographic equipment.
-
Fastener – High strength, and higher strength fasteners can improve the durability of you equipment
-
Marine hardware – Mastings, tie downs
-
Marine and Pump shafts – better corrosion than stainless steel SUS304 and SUS316, with double the yield strength.
-
Valves and fittings – better corrosion than SUS 304 and SUS 316 Stainless Steel, with double the yield strength.
-
Downhole rigging – better corrosion than Stainless Steel 304, Stainless Steel 316 and 17-4 Stainless Steel, with double the yield strength in annealed condition.
- Reduced cross sections – better corrosion than Stainless Steel Grade 304, 316 and sus630,
Corrosion Properties of Nitronic 50
NITRONIC50 / XM-19 Stainless Steel provides outstanding corrosion resistance – superior to Types sus316, sus316L, sus317 and sus317L in many media. For many applications the 1950 F (1066 C) annealed condition provides adequate corrosion resistance and a higher strength level. In very corrosive media or where material is to be used in the as-welded condition, the 2050 F (1121 C) annealed condition should be specified. High-Strength (HS) NITRONIC50(XM-19) bars are useful for applications such as shafting and bolting, but do not quite exhibit the corrosion resistance of the annealed conditions in all environments.
Intergranular Attack
The resistance to intergranular attack is excellent even when sensitized at 1250 F (675 C) for one hour to simulate the heat-affected zone of heavy weldments. Material annealed at 1950 F (1066 C) has very good resistance to intergranular attack for most applications. However, when thick sections are used in the as-welded condition in certain strongly corrosive media, the 2050 F (1121 C) condition gives optimum corrosion resistance.
Our Sales & Supplier Network
Australia, Pakistan, Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.