E STEEL SDN. BHD.
No 1 & 3, Lorong Sungai Puloh 7/KU6, Kawasan Perindustrian Sungai Puloh, 42100 Klang, Selangor, Malaysia.

+603-3292 8686

Incoloy 800 / 800HT | Alloy 800 Pipe

9 / 25

We are the Malaysia and Singapore Nickel Alloy Supplier with a wide range of Nickel Alloy Rod & Round Bars , Nickel Alloy Hexagon Bars , Nickel Alloy Plate , Nickel Alloy Pipes in Monel , Inconel , Incoloy , Hastelloy , Carpenter , etc.

We export to Singapore , Indonesia , Brunei and other ASEAN Countries.
Our specialty is to provide wide range of stainless steel with no minimum order.

E Steel supply Incoloy 800H/HT (Nickel Alloy 800H/HT) Seamless Pipe and Tube.

Please refer to this link for details we supply to local market : https://www.ecarbonsteel.com/index.php?ws=latestnews&nid=92462

Description

INCOLOY 800H / 800HT Pipes & Tubes Suppliers - Nickel Alloy 800H / 800HT , UNS N08810 / N08811 / N08800

Similar Specifications : ASTM B 409, B 408, B 407, B 564

Incoloy 800, 800H, and 800HT are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure.

These nickel steel alloys are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 percent aluminum and titanium in alloy 800HT.

Incoloy 800 was the first of these alloys and it was slightly modified into Incoloy 800H. This modification was to control carbon (.05-.10%) and grain size to optimize stress rupture properties. Incoloy 800HT has further modifications to the combined titanium and aluminum levels (.85-1.20%) to ensure optimum high temperature properties.The nickel alloy is dual certified (800H/HT) and combines the properties of both forms.

Incoloy 800H/HT alloy was intended for high temperature structural applications. The nickel content makes the alloys highly resistant to both chloride stress-corrosion cracking and to embrittlement from precipitation of sigma phase. The general corrosion resistance is excellent. In the solution annealed condition, alloys 800H and 800HT have superior creep and stress rupture properties.

Incoloy 800 is primarily used in applications with temperatures up to 1100°F, where alloys 800H and 800HT are normally used in temperatures above 1100°F where resistance to creep and rupture is required.

The chemical balance allows the nickel steel alloy to exhibit excellent resistance to carburization, oxidation and nitriding atmospheres. Incoloy 800HT will not become embrittled even after long periods of usage in the 1200-1600°F range where many stainless steels become brittle. Excellent cold forming characteristics typically associated with the nickel-chromium alloys are exhibited with 800HT. When cold formed extensively the grain size produces a visibly undulated surface called “orange peel”.
Incoloy 800HT can be welded by the common techniques used on stainless steels.

* Incoloy is a registered trademark of the INCO Family of companies

Characteristics of Incoloy 800H/HT Pipes

High temperature strength
High creep rupture strength
Resistant to oxidation and carburization in high temperature environments
Good corrosion resistance in many acidic environments
Good resistance to many sulfur-containing atmospheres

Chemical Composition of Nickel Alloy 800H/HT Pipes and Tubes

CHEMICAL COMPOSITIONS
	Ni	Cr	Mn	C	Si	Fe	C
Max	35.0	23.0	1.5	0.10	1.0		0.75
Min	30.0	19.0				39.5

Mechanical Properties of Alloy 800H/HT Pipes and Tubes

Mechanical Property Requirements
	Ultimate Tensile, min.	Yield Strength (0.2% OS)	Elong. in 2 in. or 50mm (or 4D) min., %	R/A	Hardness
Min	80 KSI	35 KSI	25
Max
Min	550 MPA	240 MPa
Max

Applications for Alloy 800 H/HT

Many companies in a wide range of industries utilize Incoloy 800H and Nickel Alloy 800H for a number of applications, especially those that deal with temperatures about 1100°F (600°C), these include:

Industrial furnace components and equipment
Petrochemical and chemical processing
Equipment for Heat-Treating
Pressure vessels and heat exchangers
Hydrocarbon cracking

Available size for Alloy 800H/HT Pipe and Tube as below :

For Welding Incoloy Alloy 800 H/HT

Nickel Alloy 800H/HT can be welded using the below welding rod :

- Recommended filler metal when welding are Inconel® 82 or 617 and welding electrodes in Inconel® 117 or Inco Weld® A.

Our Sales & Supplier Network

Australia, Pakistan, Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.

E Steel is a Global Metal Procurement Company in providing and sourcing raw materials to the wide range of engineering industries / sectors. We works as the the Online B2B Metal Marketplace to help our customers in finding the special steels that might feel hard to source locally.

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Messages*