E STEEL SDN. BHD.
No 1 & 3, Lorong Sungai Puloh 7/KU6, Kawasan Perindustrian Sungai Puloh, 42100 Klang, Selangor, Malaysia.

+603-3292 8686

AISI 1018 Low Carbon Steel | 1018 Polished , Cold Drawn Bar

9 / 10

AISI 1018 Suppliers - Low Carbon Steel / Mild Steel

AISI 1018 is a low carbon steel, which having higher manganese content than certain other low carbon steels , such AISI 1020 steel (S20C, CK22).

Hence being richer in Managanese , 1018 Low Carbon Steel is a better steel for carburized parts, since it produces a harder and more uniform case.

Chemical Composition of 1018 Steel

C	Mn	P	S
0.15 – 0.20	0.60 – 0.90	max. 0.04	max. 0.05

Low Carbon Steel AISI 1018 also has higher mechanical properties and better machining characteristics. The hot rolled bars used in the manufacture of this product are of special quality.

Most cold finished bars are produced by cold drawing. We supply CS 1018 or known as AISI 1018 in COLD DRAWN condition.

In this process, oversize hot rolled bars, which have been cleaned to remove scale, are drawn through dies to the required size.

The larger sizes are generally turned and polished, the hot rolled bars having been machine turned, rather than drawn, followed by abrasive polishing. Turned and polished bars tend to have a somewhat brighter finish than cold drawn bars.

Applications of AISI 1018 Round Bars

Material 1018 Round Bars are suitable for

Parts requiring cold forming, such as crimping, bending, or swaging.
Especially suitable for carburized parts requiring soft core and high surface hardness, such as gears, pinions, worms, king pins, ratchets, dogs so on.

Mechanical properties of Alloy Steel 1018

The following values are average and may be considered as representative.

Tensile strength	PSI	80,000	100,000
Yield point	PSI	70,000	85,000
Elongation	%	15	25
Reduction in area	%	45	55
Brinell hardness		170	220

Machinability

AISI 1018 has a machinability rating of 78% of AISI B-1112. Average surface cutting speed is 130 feet per minute.

Weldability

Low Carbon Steel Grade 1018 is easily welded by all the welding processes, and the resultant welds and joins are of extremely high quality. The grade of welding rod to be used depends upon the thickness of section, design, service requirements and so on.

Hardening

AISI 1018 will respond to any of the standard carburizing methods and subsequent heat treatments. For a hard case and tough core, the following heat treatment is suggested: carburize at 1650 – 1700 degree Fahrenheit for approximately eight hours, cool in box and reheat to 1400 – 1450 degree Fahrenheit quench in water and drawn at 300 – 350 degree Fahrenheit.

Our Sales & Supplier Network

Australia, Pakistan, Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.

E Steel is a Global Metal Procurement Company in providing and sourcing raw materials to the wide range of engineering industries / sectors. We works as the the Online B2B Metal Marketplace to help our customers in finding the special steels that might feel hard to source locally.

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Messages*