Visit
Official Website

SUS403 Stainless Steel | SUS403 | SS403 Suppliers Singapore

Previous 17 / 44 Next


We are the Stainless Steel 403 Supplier Singapore with a wide range of Stainless Steel Round Bars , Rods , Sheets and Plates.  

Our specialty is to provide wide range of stainless steel with no minimum order.


E Steel supply SUS403 Round Bars , SUS403 Rods , SS403 Plates.  

For more information on the SUS403 Export to Singapore , may refer : 
https://www.ecarbonsteel.com/index.php?ws=latestnews&nid=93729



Stainless Steel SUS403 Suppliers Singapore - SUS403 , AISI 403 , UNS S40300 , 1.4024
 

Stainless Steel 403 (1.4024) is the basic martensitic stainless steel; like most non-stainless steels it can be hardened by a “quench-and-temper” heat treatment. It contains a minimum of 11.5 per cent chromium, just sufficient to give corrosion resistance properties. It achieves maximum corrosion resistance when it has been hardened and tempered and then polished. SUS403 is a general purpose grade often supplied in the hardened, but still machinable condition, for applications where high strength and moderate heat and corrosion resistance are required.


SUS403 Stainless Steel : 


Type Martensitic Stainless Steel
Designations France: AFNOR Z 12 C 13M
Germany: DIN 1.4024
Japan: JIS SUS 403 , JIS SUS 416
United Kingdom: B.S. 420 S 29 , B.S. En. 56 B
United States: AMS 5611 , AMS 5612 , ASTM A176 , ASTM A276 , ASTM A314 , ASTM A473 , ASTM A479 , ASTM A511 , ASTM A580 , FED QQ-S-763 , MIL SPEC MIL-S-862 , SAE 51403 , SAE J405 (51403) , UNS S40300

 

Chemical Composition of SS403 - 

The table below shows the chemical composition of the AISI 403 Stainless Steel : 

Element Content (%) 
Iron , Fe 86
Chromiun , Cr 12.3
Silicon , Si 0.50
Carbon , C 0.15
Phosphorous , P 0.040
Sulfur , S 0.030
Carbon , C  0.15


Mechanical Properties of Stainless Steel 403 - 

Properties  Metric  Imperial 
Tensile strength 485 MPa 70300 psi
Yield strength (@strain 0.200 %) 310 MPa 45000 psi
Fatigue Strength (annealed, @diameter 25mm/0.984 in) 275 MPa 39900 psi
Shear modulus (typical for steel) 76.0 GPa 11000 ksi
Elastic modulus 190-210 GPa 27557-30458 ksi
Poisson’s ratio 0.27-0.30 0.27-0.30
Elongation at break (in 50 mm) 25.00% 25.00%
Izod impact (tempered) 102 J 75.2 ft-lb
Hardness, Brinell (converted from Rockwell B hardness) 139 139
Hardness, Knoop (converted from Rockwell B hardness) 155 155
Hardness, Rockwell B 80 80
Hardness, Vickers (converted from Rockwell B hardness) 153 153

 

Corrosion Resistance of SUS403 , SS403 

SUS403 resists dry atmosphere, fresh water, mild alkalies and acids, food, steam and hot gases. Must be hardened for maximum heat and corrosion resistance. Performance is best with a smooth surface finish. Less corrosion resistant than the austenitic grades and also less than 17% chromium ferritic alloys such as SUS430.

Applications of Stainless Steel 403 , SUS403 

Typical applications include:
 

·         Bolts & Nults

·         Screws

·         Bushings

·         Pump and valve parts and shafts

·         Steam and gas turbine parts

·         Petroleum fractionating towers

·         Mine ladder rungs
 

Our Sales & Supplier Network

Australia, Pakistan,  Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.

E Steel is a Global Metal Procurement Company in providing and sourcing raw materials to the wide range of engineering industries / sectors.  We works as the the Online B2B Metal Marketplace to help our customers in finding the special steels that might feel hard to source locally. 

 

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*